Table of Contents
Advertisement
management settings. Start your Web browser and log on to the router's Web
management interface by opening http://manhattanrouter, then click the "General
Setup" button on the left.
2.4.1 Time Zone and Time Auto-Synchronization
Click the "System" menu on the left of the Web management interface, then click
"Time Zone." You'll be prompted to select a time zone from the "Set time zone"
drop-down menu and enter the IP address or host name of the time server. If you
want to enable the Daylight Saving setting, check the "Enable Function" box and
set the duration of Daylight Saving.
Click "Apply" and this message
will display. Click "Continue" to
save the settings and make
additional changes; click
"Apply" to save the settings and
restart the router so the
settings will take effect after it reboots.
2.4.2 Changing the Management Password
The default password of this router is 1234, and it's displayed on the login prompt
when accessed from the Web browser. There's a security risk if you don't change
the default password, since everyone can see it. This is very important when you
have the wireless function enabled. To change the password, click the "System"
menu on the left of the Web management interface, then click "Password
Settings."
Current Password — Enter the current password (for example, 1234).
New Password — Enter the new password.
Confirm Password — Enter the new password again.
14
SYSTEM & NETWORK SETUP
Advertisement
Table of Contents
