Table of Contents
Advertisement
Current QoS Table — All existing QoS rules are shown here.
Add — Click to add new QoS rules (see section 3.1.2 Adding a New QoS Rule).
Edit — To modify the content of a specific rule, check the "Select" box of that rule,
then click "Edit." NOTE: Only one rule should be selected at a time. If you didn't
select a rule before clicking "Edit," you'll be prompted to add a new rule.
Delete — You can select one or more rules to delete by checking the "Select" box of
the rule(s) you want to delete, then clicking "Delete." If the QoS table is empty, this
button is inaccessible.
Delete All — Click to delete all rules in the QoS table. If the QoS table is empty,
this button is inaccessible.
Move Up — Click to raise the priority of the selected QoS rule.
Move Down — Click to lower the priority of the selected QoS rule.
3.1.2 Adding a New QoS Rule
After you click "Add" on the QoS screen, you'll have these options.
Rule Name — Enter a name for the QoS rule (up to 15 alphanumerical characters;
e.g, "VoIP Phone").
Bandwidth — Set the bandwidth amount of the QoS rule. You need to select the
data direction of this rule (Upload or Download) and the speed of the bandwidth
limitation in kbps, then select the type of QoS: "Guarantee" (guaranteed usable
bandwidth for this rule) or "Max" (set the maximum bandwidth for the application
allowed by this rule).
36
ADVANCED FUNCTIONS
Advertisement
Table of Contents
