Telephone operation
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing
temporarily during a call. This is useful if you need to send touch-tone signals to
access your telephone banking or long distance services.
During a call, press TONE .
1.
2.
Use the dialing keys to enter the number. The telephone sends touch-tone signals.
It automatically returns to pulse dialing mode after you end the call.
Redial
Each handset stores the last 10 telephone numbers dialed.
•
When there are already 10 entries, the oldest entry is deleted to make room for the
new entry.
•
Entries are in reverse chronological order.
•
The handset plays two beeps when you reach the end or beginning of the redial list,
or when you access the redial list with no records.
To review and dial a redial entry:
Press REDIAL when the phone is not in use.
1.
Press ,
or REDIAL repeatedly until the desired
2.
entry displays.
3.
Press
or
-OR-
1.
Press
or
Press REDIAL and then press ,
2.
until the desired entry displays.
Press SELECT to dial.
3.
To delete a redial entry:
Press REDIAL when the handset is not in use.
1.
or REDIAL repeatedly to browse to the desired entry.
2.
Press ,
Press DELETE to delete the displayed number. You hear a confirmation tone.
3.
to dial.
when the phone is not in use.
or REDIAL repeatedly
21
Redial #2/10
800-267-7377
ECO