Y-cam Black SD User Manual page 79

The motion detection feature does not
send e‐mail alerts.
The power LED is flashing green and the
camera is inaccessible
Motion Detection triggers unexpectedly
What do the changes to the LED light
mean?
If the Network Camera is not working properly, these suggestions might help you identify the problem. If the problem
persists check the support section on http://www.y‐cam.com/
1. Check the e‐mail alert feature is properly configured
2. The SMTP server that the IP camera uses to send the e‐mail may be
filtering e‐mail to prevent spam from being sent from your server. Try
using a different SMTP server or contact your ISP to see if SMTP access is
being blocked.
A firmware upgrade has been interrupted or the firmware has otherwise
been damaged. Please contact your place of purchase or Y‐cam Technical
Support.
Motion detection is based on changes in pixel in the image. This means
that if there are sudden changes in the lighting, motion detection may be
triggered mistakenly. Lower the sensitivity setting to avoid problems.
Amber ‐ Steady for connection to a 10/100 M bit/s network. Flashes for
network activity.
Green ‐ Steady for connection to a wireless network. Flashes for network
activity.
Page 79