Olympus SH-60 Instruction Manual page 46

Resetting the fi le names of Resetting the fi le names of
pictures d d [File Name]
pictures [File Name]
Folder name Folder name
DCIM 100OLYMP
999OLYMP
Automatic
numbering
46 EN
File name
Pmdd0001.jpg
Pmdd9999.jpg
Automatic
numbering
Month: 1 to C
(A=October,
B=November,
Pmdd
C=December)
Day: 01 to 31
Submenu 2
This resets the sequential number
for the folder name and fi le name
Reset whenever a new card is inserted.
This is useful when grouping
images on separate cards.
Even when a new card is inserted,
this continues the numbering for
the folder name and fi le name
Auto from the previous card. This is
useful for managing all image
folder names and fi les names with
sequential numbers.
The number for the folder name is reset to 100,
*1
and the one for the fi le name is reset to 0001.
Adjusting the image processing Adjusting the image processing
function d d [Pixel Mapping]
function [Pixel Mapping]
● This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
● For best results, wait at least one minute after
taking or viewing pictures before performing pixel
mapping. If the camera is turned off during pixel
mapping, be sure to perform it again.
To adjust the image processing function To adjust the image processing function
Press the A button when [Start] (Submenu 2) is
displayed.
● The check and adjustment of the image
processing function starts.
Application
*1