Selecting The Method For Measuring The Brightness - Olympus SH-60 Instruction Manual

Setting the Touch Shutter function Setting the Touch Shutter function
z [Touch Shutter] [Touch Shutter]
z
Submenu 2
The subject that is touched is
On focused on and the picture is
taken automatically.
The subject that is touched is AF
Off locked. (Press the shutter button
manually.)
● This setting can also be changed by touching the
panel. "Using for the shooting mode" (p. 9)
Selecting the focusing area Selecting the focusing area
z [AF Mode] [AF Mode]
z
Submenu 2
The camera focuses
automatically. (If a face is
detected, it is shown by a white
frame
Face/iESP pressed halfway and the camera
focuses, the frame turns to
green
camera chooses a subject in the
frame and focuses automatically.)
The camera focuses on the
Spot subject located within the AF
target mark.
The camera tracks the subject
AF Tracking movement automatically to focus
on it continuously.
For some subjects, the frame may not appear or
*1
may take some time to appear.
*2 If the frame blinks in red, the camera cannot focus.
Try refocusing on the subject.
34 EN
Application
Application
*1 ; when the shutter button is
. If no face is detected, the
*2
To focus on a moving subject To focus on a moving subject
continuously (AF Tracking) continuously (AF Tracking)
1 Hold the camera to align the AF target mark on
the subject and press the A button.
2 When the camera recognizes the subject, the
AF target mark automatically tracks the subject
movement to focus on it continuously.
3 To cancel the tracking, press the A button.
● Depending on the subjects or the shooting
conditions, the camera may be unable to lock the
focus or fail to track the subject movement.
● When the camera fails to track the subject
movement, the AF target mark changes to red.
Selecting the method for Selecting the method for
measuring the brightness measuring the brightness
n ] ]
z [ESP/ [ESP/n
z
Submenu 2
Shoots to obtain a balanced
brightness over the entire screen
ESP (Meters the brightness at the
center and surrounding areas of
the screen separately).
Shoots the subject at the center
during backlighting (Meters the
5 (spot)
brightness at the center of the
screen).
● When set to [ESP], the center may appear dark
when shooting against strong backlighting.
Application