AOR AR-3000A Instruction Manual page 31

E-4 Erasure of memory contents.
The stored data
procedure:
First recall the memory channel onto the LCD then press [2nd F] followed
bY [MEMO. DELJ
Example:
Erase the memory content of channel 01 of bank 2.
Press [2nd Fl
CBANK2) is displaYed on the LCD then press [ENTER].
memory bank 2.
Press [0] [ll [MEMO] in sequence to recall memory channel number O l .
Press [2nd F ] [MEM O . DELJ i n sequence to erase the memory contents.
lt is also possible to clear all memory channels bY resetting the microprocessor.
Switch off the main power switch.
switch on the main power switch while holding keys
release the keYs.
will be cleared and memory bank
frequencies. (Page 54) .
may be erased
[ BANK] in sequence.
the microprocessor will reset.
from a memory
Press the [UP/DOWN] keY until
Hold down keys [3] and [6] together.
MemorY banks 2.
1 will be loaded with factory default
5-2 Operating modes.
using the following
this is to select
[3] and [6].
3 and 4
Now
29