Procedure For Tilting Down (Manual Tilt Models) - Yamaha F4A Owner's Manual

Operation
4. Close the fuel cock.
5. Tilt support bar equipped models: Hold
the rear of the top cowling or the rear
handle (if equipped) with one hand and
tilt the outboard motor up fully until the
tilt support bar automatically locks.
27
6. Tilt support knob equipped models: Hold
the rear of the top cowling with one
hand, fully tilt the outboard motor up,
and push the tilt support knob into the
clamp bracket.
7. Tilt support lever equipped models: Hold
the rear handle and tilt the engine up ful-
ly until the tilt support lever automatically
locks.
ZMU02689
NOTE:
Tilt support lever/bar equipped models: If the
motor is not facing forward, the tilt support le-
ver/bar cannot automatically turn to the
locked position. If the tilt support lever/bar
does not automatically lock, swing the motor
a little to the left and right.
EMU28032
Procedure for tilting down (manual
tilt models)
1. Slightly tilt the outboard motor up.
ZMU02660
2. If equipped with the tilt support bar:
Slowly tilt the outboard motor down
while pulling the tilt support bar lever up.
ZMU02694