Events - Axis P1347–E User Manual

AXIS P1347–E Network Camera

Events

Events
The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
Applications — use installed applications to trigger the rule, see Applications, on page 35.
•
• Detectors
Audio Detection — trigger the rule when audio is detected, see Audio detection, on page 34.
-
- Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 32.
Tampering — trigger the rule when tampering is detected, see Camera Tampering, on page 32.
-
Hardware
•
- Network — trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
• Input Signal
Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see I/O
-
Ports, on page 49.
Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on
-
the Live View page, on page 13. This can for example be used to validate actions during product installation
and configuration.
• PTZ
Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used
-
as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a PTZ operation.
- Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be used
with the Send Images action to upload images from the preset position.
• Storage
Available — trigger the rule when the storage device is unmounted or removed. This can for example be
-
used to send maintenance notifications.
Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be
-
overwritten to prevent the storage device from becoming full.
Locked — trigger the rule if the storage device is locked (write protected).
-
System
•
- System Initializing — trigger the rule when the product is being started. This can for example be used to send a
notification when the product restarts.
• Time
Recurrence — trigger the rule periodically, see Recurrences, on page 38. This can for example be used to upload
-
an image every 5 minutes.
Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 38.
-
Available actions include:
36