The Live View Page - Axis P1347–E User Manual

AXIS P1347–E Network Camera
Accessing the product
Note
• The default administrator user name root is permanent and cannot be deleted.
• If the password for root is lost, the product must be reset to the factory default settings. See Reset to factory default
settings, on page 51.
Configure capture mode
Capture mode defines the maximum resolution and maximum frame rate available in the Axis product. The capture mode setting also
affects the camera's angle of view; if using a capture mode with a smaller maximum resolution, the angle of view is reduced.
Select the desired capture mode from the drop-down list and click OK.
See also Capture Mode, on page 22.

The Live View page

If the Axis product has been customized to meet specific requirements, not all the items described below will appear in the Live View
page. The following provides an overview of each available button.
Controls on the Live View page
Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG.
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile. Stream
profiles are configured under Video & Audio > Stream Profiles. See Stream Profiles, on page 21.
Click Pulse to activate the output for a defined period of time, such as switching on an external light for 20 seconds.
13