Setting - Sanyo PLC-XU105 Owner's Manual

Setting

Setting
This projector has a Setting menu that allows you to set up
the other various functions described below.
Press the MENU button to display the On-Screen
1
Menu. Use the Point
frame pointer to the Setting Menu icon.
 Use the Point
pointer to the desired item and then press the SELECT
button. The Setting dialog box appears.
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, and Japanese.
Auto setup
This function enables Auto Keystone correction and Auto
PC adjustment by pressing the AUTO SETUP button on the
top control. Settings for those functions can be altered as
follows:
Auto PC Adj .
On. . . . . . . Enables Auto PC Adjustment when pressing
the AUTO SETUP button on the top control.
Off. . . . . . . Disables Auto PC Adjustment.
Auto Keystone
Auto . . . . . Always works and corrects keystone distortion
according to the projector's tilt.
Manual . . . Works only when pressing the AUTO SETUP
button on the top control.
Off. . . . . . . Disables Auto Keystone.

Notes:
• Auto PC Adj. and Auto Keystone cannot be set "Off" at the
same time.
• Auto Keystone corrects vertical distortion only, not correct
horizontal distortion.
• The Auto Keystone cannot work when Ceiling feature is set
"On" in the Setting menu (p.47).
• Perfect correction of the image distortion cannot be ensured
with the Auto setup function. If the distortion is not corrected
properly by pressing the AUTO SETUP, adjust manually by
pressing the KEYSTONE button on
the remote control or selecting Keystone in the Setting menu
(pp.23, 44).
• Fine sync, Total dots, Horizontal and Vertical position of
some computers cannot be fully adjusted with the Auto PC
Adjustment function. When the image is not provided properly
with this operation, manual adjustments are required (pp.30–
31).
◄►
buttons to move the red
▲▼
buttons to move the red frame
the top control or on
Setting Menu (Language)
Set the red frame
pointer to the item
a n d p r e s s t h e
SELECT button.
Press the SELECT button
at Language, then the
Language Menu appears.
Press the SELECT button
here to display the other
languages.
Auto setup
Select Auto setup and this
box appears. Choose the
desired setting for Auto
keystone and Auto PC adj.
with the Point
Setting Menu icon
◄►
buttons.
43