1100 Fan Assembly And Heat Sink Assembly - Lenovo V110-15IKB Maintenance Manual

1100 Fan assembly and Heat Sink assembly

For access, remove these FRUs in order:
• "1010 Optical drive" on page 34
• "1020 Base cover" on page 35
• "1030 Battery pack" on page 37
• "1040 Hard disk drive" on page 39
• "1050 Speaker" on page 42
• "1060 IO board" on page 44
• "1070 PCI Express Mini Card for wireless LAN" on page 45
• "1080 ODD board" on page 47
• "1090 DIMM" on page 48
Figure 10. Removal steps of fan assembly and heat sink assembly
Unplug the fan connector in the direction shown by arrow 1 , and then remove
the screws 2.
Step Screw (quantity)
M2 × 6 mm, Phillips head, nylok-coated (5)
2
FAN TO UPPER
When installing: Make sure that the fan connector is attached firmly to the
system board.
Lenovo V110-15IKB
a
b
b
b
b
b
Color
Black
Torque
1.85+/-0.15 kgf/cm
49