Table of Contents
Advertisement
Problem
Data cannot be
The title to be dubbed is copyright
imported
protected.
The number of titles stored in the HDD
has reached the maximum amount.
The remaining space on the HDD is
running out.
The title/group name
Protection of the title/group name is
cannot be changed
turned on.
The remote control
The battery of the remote control unit
unit does not work
has run out.
The remote control code of this unit
and the remote control unit are
different from each other.
A "LOCKED" message appears on the
display window of the unit.
The disc cannot be
A "LOCKED" message appears on the
ejected
display window of the unit.
The "READING" message does not
disappear from the unit's display
window, and the disc tray does not
open when the [ M ] button is pressed.
The disc cannot be
A disc that cannot be played on this
played
unit is inserted.
The region code of the BD or DVD is
different from that of this unit.
An unfinalised DVD disc that is
recorded using another device is
inserted.
Output is at 576i
The component output setting may be
regardless of the
changed to 576i after viewing at a
component output
setting of 1080/24p using a HDMI
resolution setting
connection.
The aspect ratios of
When two monitors are connected
the HDMI output and
respectively to the HDMI output and
component output are
component output terminals of this
different
unit, the screen aspect ratio of the
component output may not be
appropriate if "HDMI VIDEO MODE" is
set to "ON".
Symptom
Action
Titles that are copyright-protected cannot
be dubbed. Select a title that is not
copyright-protected.
Delete or combine the titles in the HDD to
reduce the amount of titles to less than
500.
Delete the titles in the HDD to increase the
remaining space.
Turn protection off for the title/group name. (A page 67)
Change new batteries for the remote
control.
Change the "REMOTE CONTROL CODE"
for the remote control to the same number
used by this unit.
Disable the "mode lock" setting.
Disable the "tray lock" setting.
Pressing the [ M ] button at the front of the
unit for five seconds or longer opens the
disc tray. To close the disc tray after
removing the disc, press the [ A ] button,
and wait until the tray is closed and power
is turned off.
(If the disc tray does not open after
pressing the [ M ] button for five seconds
or longer, consult our authorized dealer.)
Confirm that the disc is playable on this
unit.
Confirm that the region number is playable
on this unit.
Use that device to finalise the disc.
Turn the power off, and turn it on again.
When two monitors are connected
simultaneously, users are recommended
to set "HDMI VIDEO MODE" to "OFF".
Others
Reference
Page
(A page 25)
(A page 65)
(A page 65)
(A page 16)
(A page 16)
(A page 87)
(A page 87)
-
(A page 10)
(A page 10)
-
-
(A page 83)
105
Advertisement
Table of Contents
