Table of Contents
Advertisement
Dubbing/Importing
Importing Data from an
i.LINK-compatible Device to
the HDD (Continued)
Select "XP", "SP", "LP", or "EP" from the "RECORDING
MODE" option.
Memo:
HDV contents will be imported in DR mode.
For more details, refer to "Recording Modes" (A page 30) .
4 Select "START", and press the [OK] button
Importing of the titles starts.
After titles are successfully imported, a "DUBBING IS
COMPLETED" message appears on the monitor.
Imports data from current position
You can import videos from the current tape position till the
end as follows.
1 Select "IMPORT FROM CURRENT POSITION",
and press the [OK] button
A check mark is added to the "IMPORT FROM CURRENT
POSITION" item.
2 Select "NEXT", and press the [OK] button
A recording mode selection screen appears.
40
3 Select "RECORDING MODE" and press the [OK]
button to display the pop-up menu
Select "XP", "SP", "LP", or "EP" from the "RECORDING
MODE" option.
Memo:
HDV contents will be imported in DR mode.
For more details, refer to "Recording Modes" (A page 30) .
4 Select "START", and press the [OK] button
Importing of the titles starts.
After titles are successfully imported, a "DUBBING IS
COMPLETED" message appears on the monitor.
Cancel dubbing
To cancel importing before it starts
Select "CANCEL" from the menu, and press the [OK]
button to cancel importing of a title.
Alternatively, you can press the [RETURN] button to cancel
importing and return to the initial screen.
To cancel importing while it is in progress
Press the [OPTION] button. Select "CANCEL" from the
Cancel Importing menu, and press the [OK] button. Doing
so imports data to the HDD up to the position where you
have chosen to stop.
Advertisement
Table of Contents
