Table of Contents
Advertisement
Settings Menu
DIGITAL OUT
Set this item according to the device connected to the digital
audio output terminal (optical digital).
PCM DOWN SAMPLING
For specifying settings on sampling frequency conversion.
Setting
Values
OFF
Sampling frequency is not converted.
ON
Audio recorded at a sampling frequency of
96 kHz or 88.2 kHz is converted to 48 kHz
and 44.1 kHz respectively.
Memo:
Setting to "OFF" may produce the same effects as the "ON"
mode for some discs.
Dolby Digital
For setting audio output to "BITSTREAM" or "PCM".
Setting Values
BITSTREAM
Use this setting when connecting a
device that is able to decode "Dolby
Digital".
PCM
Audio input will be changed and output as
"PCM".
Use this setting when connecting a
device that is unable to decode "Dolby
Digital".
Dolby Digital Plus/TrueHD
For setting audio output to "BITSTREAM" or "PCM".
Setting
Values
BITSTREAM
Use this setting when connecting a
device that is able to decode "Dolby
Digital Plus/TrueHD".
PCM
Audio input will be changed and output as
"PCM".
Use this setting when connecting a
device that is unable to decode "Dolby
Digital Plus/TrueHD".
DTS
For setting audio output to "BITSTREAM" or "PCM".
Setting Values
BITSTREAM
Use this setting when connecting a
device that is able to decode "DTS".
PCM
Audio input will be changed and output as
"PCM".
Use this setting when connecting a
device that is unable to decode "DTS".
82
Description
Description
Description
Description
DTS-HD
For setting audio output to "BITSTREAM" or "PCM".
Setting Values
BITSTREAM
Use this setting when connecting a
device that is able to decode "DTS-HD".
PCM
Audio input will be changed and output as
"PCM".
Use this setting when connecting a
device that is unable to decode "DTS-HD".
AAC
For setting audio output to "BITSTREAM" or "PCM".
Setting Values
BITSTREAM
Use this setting when connecting a
device that is able to decode "AAC".
PCM
Audio input will be changed and output as
"PCM".
Use this setting when connecting a
device that is unable to decode "AAC".
Memo:
Audio sound may not be properly played back if the audio
equipment in use does not support "BITSTREAM" output.
In this case, set to "PCM".
DV IN AUDIO SETTING
For changing the audio recording settings during DV input.
Setting Values
STEREO 1
Records the audio sound during video
recording (L1, R1).
STEREO 2
Records audio sound that is added later
(L2, R2), such as during editing.
MIX
Records "STEREO 1" and "STEREO 2"
sounds.
BD MIX SOUND
For setting a mixture of BD video secondary audio and
operation sounds output.
Setting
Values
OFF
Outputs main audio only.
ON
Outputs a mixture of BD video secondary
audio and operation sounds during playback
of BD-Videos that contain BD video
secondary audio and menu operation
sounds.
Memo:
Output is converted to Dolby Digital or DTS according to
the main audio when the "DIGITAL OUT" item is set to
"BITSTREAM".
Description
Description
Description
Description
Advertisement
Table of Contents
