Installation - D-Link dge-530t User Manual

Section 2 - Installation

Installation

Note:.Install.the.drivers.before.installing.the.adapter.into.your.computer.
Turn on your computer and insert the D-Link DGE-530T Driver CD in the CD-ROM drive. The step-by-step instructions that
follow are shown in Windows XP. The steps and screens are similar for the other Windows® operating systems.
®
If the CD autorun function does not automatically start on your computer, go to Start > Run. In the run command box
type "D:\autorun.exe" (where D: represents the drive letter of your CD-ROM drive).
Drivers for non-Windows operating systems are located on the D-Link CD.
Step.1 - When the autorun screen appears, click Install.(this will launch the Network Utility program and install the drivers)..
An Installation Wizard will guide you through the process, no matter which operating you are running. Your DGE-530T will be
installed successfully in just a few moments, allowing you to enjoy the many advantages of joining an Ethernet LAN.
D-Link DGE-530T User Manual 9