Product.overview; Package Contents; System Requirements - D-Link dge-530t User Manual

Section 1 - Product Overview
DGE-530T Gigabit Desktop Adapter (Rev C)
Low Profile Bracket
Wake on LAN (WoL) Cable
CD with drivers, software, and manual
Quick Install Guide
CAUTION: Under ordinary circumstances, a DGE-530T card will not be affected by a static charge that may be received through your body during handling of the unit.
In special circumstances, the user may carry an extraordinarily high static charge and it is good practice to reduce the charge by touching a ground before handling the
adapter card. If any of these items are missing or damaged, please contact your local reseller for replacement.
Before installing the DGE-530T, check your system for the following minimum configuration requirements:
• An open PCI bus master slot, 32-bit, operating at 33MHz
• 512MB of RAM (1GB or more recommended)
• Intel Pentium 4 processor 2.0GHz (or equivalent) or faster
• The latest BIOS for your computer
• One of the following types of twisted-pair network cabling:
• 4 – pair Category 5 or better for 1000Mbps
• Category 5 or better for 100Mbps
• Category 3, 5 or better for 10Mbps
D-Link DGE-530T User Manual
Product Overview

Package Contents

System Requirements

4