Jumper
The motherboard provides the following jumper for you to set the computer's function.
This section will explain how to change your motherboard's function through the use
of jumper.
Hardware Overclock FSB Jumpers: JB1, JB2 (optional)
You can overclock the FSB to increase the processor frequency by changing the
jumpers JB1 and JB2. Follow the instructions below to set the FSB.
1
3
200 MHz
Important
Make sure that you power off the system before changing the jumpers
1
JB1 JB2
1
3
266 MHz
Hardware Setup
1
3
333 MHz
2-19