Setting The Speaker Impedance - Yamaha HTR-5940 Owner's Manual

Setting the speaker impedance

CAUTION
If you are to use 4 or 6 ohm speakers, set "SP
IMP." to "6ΩMIN" as follows BEFORE using this
unit.
STANDBY
/ON
PRESET/TUNING FM/AM A/B/C/D/E
CATEGORY
SEARCH MODE
EDIT NEXT
l h
STRAIGHT PROGRAM
PHONES SPEAKERS
A B
EFFECT
TONE CONTROL BASS/TREBLE
SILENT CINEMA
2,5
2,4
1
Make sure this unit is set to the standby
mode.
See page 26 for details about turning on this unit or
standby mode.
2
Press and hold STRAIGHT (EFFECT) on the
front panel and then press STANDBY/ON to
turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
While holding
down
STRAIGHT
EFFECT
(U.S.A. model)
VOLUME
l PRESET/TUNING/CH h
MEMORY TUNING MODE
DISPLAY
LEVEL MAN'L/AUTO FM AUTO/MAN'L
INPUT
VIDEO AUX
INPUT MODE
MULTI CH
INPUT
VIDEO L AUDIO R PORTABLE
3
STANDBY
/ON
3
Press PROGRAM l / h buttons on the front
panel to select "SP IMP.".
The following display appears in the front panel
display.
l
PROGRAM
S P I M P . - 8 M I N
4
Press STRAIGHT (EFFECT) on the front
panel repeatedly to select "6ΩMIN".
The following display appears in the front panel
display.
STRAIGHT
S P I M P . - 6 M I N
5
Press STANDBY/ON on the front panel to
save the new setting and set this unit to the
standby mode.
STANDBY
Note
The setting you made is reflected next time you turn on this unit.
CONNECTIONS
h
EFFECT
/ON
25