Using The Sleep Timer - Yamaha HTR-5940 Owner's Manual

USING OTHER FEATURES

Using the sleep timer

Use this feature to automatically set this unit to the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to AC OUTLET(S) (see page 24).
1
Press one of the input selector buttons on
the remote control to select the desired input
source.
MD
CD CD-R
CBL
DVD DTV
V-AUX DVR
2
Start playback on the selected source
component or select a broadcast station.
Refer to the operating instructions for the source
component.
See page 44 for details about tuning instructions.
3
Press SLEEP on the remote control
repeatedly to set the amount of time.
Each time you press SLEEP, the front panel display
changes as shown below.
SLEEP 120min
SLEEP OFF SLEEP 30min
34
SLEEP
XM
MULTI CH IN
TUNER
SLEEP
SLEEP 90min
SLEEP 60min
The SLEEP indicator flashes while you are switching
the amount of time for the sleep timer. Once the sleep
timer is set, the SLEEP indicator lights up in the front
panel display, and the display returns to the selected
sound field program.
DVR V-AUX
SP
A
SLEEP 120min
DVR V-AUX
SP
A
STRAIGHT
4
To cancel the sleep timer, press SLEEP on
the remote control repeatedly until "SLEEP
OFF" appears in the front panel display.
DVR V-AUX
SP
A
SLEEP OFF
The SLEEP indicator turns off, and "SLEEP OFF"
disappears from the front panel display after a few
seconds.
y
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or STANDBY/ON on the
front panel) to set this unit to the standby mode.
pCD
DTV/CBL DVD MD/CD-R TUNER XM
VOLUME
SLEEP
L
Flashes
pCD
DTV/CBL DVD MD/CD-R TUNER XM
VOLUME
SLEEP
L
Lights up
SLEEP
pCD
DTV/CBL DVD MD/CD-R TUNER XM
VOLUME
L
dB
R
dB
R
dB
R