Yamaha HTR-5940 Owner's Manual page 33

9
Press j / i to select the desired setting.
PRESET/CH
A-E/CAT.
CHECK OK? .. YES
Choices: YES, NO
• Select "YES" to complete the setup procedure if
the test tone levels from each speaker were
satisfactory.
• Select "NO" to proceed to the speaker level
adjustment menu to balance the output level of
each speaker.
10
Press ENTER to confirm your selection.
PRESET/CH
A-E/CAT.
• If you selected "YES" in step 9, the setup
procedure is completed and the display returns to
the top "SET MENU" display.
• If you selected "NO" in step 9, the front speaker
level adjustment display appears in the front panel
display.
ENTER
A-E/CAT.
ENTER
A-E/CAT.
11
Press d / u to select a speaker and then j / i
to adjust the balance.
The selected speaker and the front left speaker or the
surround left speaker output a test tone in turn.
• Press i to increase the value.
• Press j to decrease the value.
PRESET/CH
ENTER
A-E/CAT. A-E/CAT.
FR ----||----
• Select "FR" to adjust the balance between the front
left and right speakers.
• Select "C" to adjust the balance between the front
left and center speakers.
• Select "SL" to adjust the balance between the front
left and surround left speakers.
• Select "SB" to adjust the balance between the
surround left and surround back speakers.
• Select "SR" to adjust the balance between the
surround left and surround right speakers.
• Select "SWFR" to adjust the balance between the
front left speaker and the subwoofer.
12
Press SET MENU to exit from "BASIC
SETUP".
SET MENU
MENU
SRCH MODE
BASIC SETUP
PRESET/CH
ENTER
A-E/CAT. A-E/CAT.
29