Configuration Program - TRENDnet TEW-635BRM User Manual

Configuration Program

The Wireless ADSL Router contains an HTTP server. This enables you to connect to it, and
configure it, using your Web Browser. Your Browser must support JavaScript.
The configuration program has been tested on the following browsers:
•
Netscape 7.1 or later.
•
Mozilla 1.6 or later
•
Internet Explorer V5.5 or later
Preparation
Before attempting to configure the Wireless ADSL Router, please ensure that:
•
Your PC can establish a physical connection to the Wireless ADSL Router. The PC and
the Wireless ADSL Router must be directly connected (using the Hub ports on the Wire-
less ADSL Router) or on the same LAN segment.
•
The Wireless ADSL Router must be installed and powered ON.
•
If the Wireless ADSL Router's default IP Address (192.168.0.1) is already used by anoth-
er device, the other device must be turned OFF until the Wireless ADSL Router is
allocated a new IP Address during configuration.
Using your Web Browser
To establish a connection from your PC to the TEW-635BRM:
6. After installing the TEW-635BRM in your LAN, start your PC. If your PC is already
running, restart it.
7. Start your WEB browser.
8. In the Address box, enter "HTTP://" and the IP Address of the TEW-635BRM, as in this
example, which uses the Wireless ADSL Router's default IP Address:
HTTP://192.168.10.1
9. When prompted for the User name and Password, enter values as follows:
•
User name
•
Password
admin
admin
30