Sceptre E24 Manual page 44

Problems
SWITCHING A
CHANNEL OR
SOURCE CHANGES
THE VOLUME
THERE IS NOISE OR
TRASH PIXELS ON
THE SCREEN
TIPS FOR HIGH
DEFINITION USERS
I CANNOT FIND THE
VOLUME AND
CHANNEL
CHANGING
BUTTONS
TV TURNS OFF
AUTOMATICALLY
AFTER 10 MINUTES
MY TV PICTURE IS
VERY DIM
Solutions
Different channels and inputs will sometimes have this effect
because the channel signal's own volume is already loud.
There is no way remove this completely. The TV has an
AUTO VOLUME LEVEL function that can combat this type of
effect. Please make sure that function is turned on.
When your TV's resolution is higher than the digital channel's
broadcast resolution, the signal is up-converted to match your
TV's resolution. Up-converting can cause this type of effect.
The TV is an ideal platform for viewing High Definition
Content. The best image quality can be achieved by HDMI,
YPbPr (Component), then VGA. However, due to variances in
broadcast practices, it is possible some image distortions can
occur.
The buttons are represented by the ▲▼◄► buttons located
on the remote control. ▲▼ changes the channels and ◄►
changes the volume.
The TV features a power saving mode which will automatically
turn off the TV, if there's no signal provided for more than 10
minutes.
Check to see if you are under POWER SAVING mode for your
picture mode. Keep pressing the PICTURE button on the
remote control to cycle out of POWER SAVING.
- 44 -
www.SCEPTRE.com
SCEPTRE E24 Series LED HDTV User Manual