Sceptre X325BV-FMDR Manual page 49

Problems
BIG BLACK BOX IN
THE MIDDLE OF
SCREEN
SWITCHING A
CHANNEL OR
SOURCE CHANGES
THE VOLUME
THERE IS NOISE OR
TRASH PIXELS ON
THE SCREEN
TIPS FOR HIGH
DEFINITION USERS
TIPS FOR
LETTERBOX
CONTENT USERS
I CANNOT FIND THE
VOLUME AND
CHANNEL
CHANGING
BUTTONS
TV TURNS OFF
AUTOMATICALLY
AFTER 10 MINUTES
My cell phone doesn't
work when I connect
the MHL cable to
HDMI.
Under MHL the TV's
remote won't control
the cell phone screen
fully.
UNDER MHL THE
TV'S REMOTE WON'T
CONTROL THE CELL
PHONE SCREEN
FULLY
You have turned on closed captioning and are using TEXT1 –
TEXT4. Change the setting to CC1 or turn off closed
captioning and the box will disappear. Refer to page 34 for
more information.
Different channels and inputs will sometimes have this effect
because the channel signal's own volume is already loud.
There is no way remove this completely. The TV has an
AUTO VOLUME LEVEL function that can combat this type of
effect. Please make sure that function is turned on.
When your TV's resolution is higher than the digital channel's
broadcast resolution, the signal is up-converted to match your
TV's resolution. Up-converting can cause this type of effect.
The TV is an ideal platform for viewing High Definition
Content. The best image quality can be achieved by HDMI,
YPbPr (Component), then VGA. However, due to variances in
broadcast practices, it is possible some image distortions can
occur.
Letterboxed (Widescreen) versions of DVD movies are most
commonly formatted for standard 4:3 TVs. The TV has the
capability of expanding this content so the entire screen is
filled at the expense of the image proportion. To use this
function press the aspect button on the remote control and
cycle among the available options.
The buttons are represented by the ▲▼◄► buttons located
on the remote control. ▲▼ changes the channels and ◄►
changes the volume.
The TV features a power saving mode which will automatically
turn off the TV, if there's no signal provided for more than 10
minutes.
Check if you connected to HDMI3 or another HDMI since
ONLY HDMI3 works with MHL. If it still doesn't work make
sure you have the correct MHL cable (some have more pins
than others). Ultimately, please consult your cell phone
manufacturer for compatibility issues.
For total control you will need to use the cell phone's touch
screen. The TV's remote have limited functions and its
controls are dependent on the program you are using.
For total control you will need to use the cell phone's touch
screen. The TV's remote have limited functions and its
controls are dependent on the program you are using.
- 49 -
www.SCEPTRE.com
SCEPTRE X325BV-FMDR User Manual
Solutions