Sceptre X325BV-FMDR Manual page 13

HDMI1-3 – HDMI connects to devices that use HDMI cable, such as
6.
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video. HDMI 3 also doubles as the MHL connection for
cell phones. MHL is a protocol where the TV will display what your
cell phone displays. If your cell phone supports MHL you can
purchase a MHL cable from any electronic store and connect it to
HDMI3 and also your cell phone. Make sure the TV's source is
changed to HDMI 3 and turn on your cell phone. You should see an
image of your cell phone screen. HDMI 3 also supports ROKU™
streaming stick. Plug the ROKU stick to HDMI 3, and switch your
source to HDMI3. Afterwards use the purple colored buttons to
access ROKU functions.
SPDIF - This connection port is used for sending out digital audio
7.
signals to digital surround sound receivers. The orange (COAX
SPDIF OUT) connector sends out either bit-stream or PCM digital
sound signal to a home theater receiver with digital coax input.
Analog Audio Out – This connection is for connecting to analog
8.
audio receivers.
HEADPHONE – This connection is for headphones to be attached to
9.
the TV.
USB – USB connects to USB flash drives for playing music and
10.
picture. The USB port is also used for updating the TV's firmware.
Please Note:
This TV features a power saving function which will turn off the
•
TV automatically after 10 minutes of idling on a connection with
no signal. This feature is present on all connection.
SCEPTRE X325BV-FMDR User Manual
- 13 -
www.SCEPTRE.com