Speaker System Connection - LG KR-W1080HTS Manual

Speaker System Connection

Speaker Connections
Connect the speakers to the front (right, left) or
center speaker connectors.
Connect the subwoofer to the woofer connector.
Connect the power cord of the wireless speakers to
the outlet.
Connect the SOUND SIGNAL connector of
transmitter and the rear (right, left) speaker
terminals of main unit with the SOUND SIGNAL
cable.
Connect the DC IN connector of transmitter and the
transmitter connector of main unit with the DC
power cable.
Set the distance between the transmitter and
wireless speakers (right, left) within 10m.
Wireless Speaker
[Rear speaker (Right)]
Notes:
Center speaker
Front speaker
(Right)
Transmitter
Black
Red
SIGNAL ID./CH. DC IN
DC power cable
Sound signal cable
Optimum performance can be implemented only when the
transmitter and the wireless speakers within distance of
2m through 10m is used since communication failure may
occur if closely approaching distance between them.
Be sure to match the speaker cable to the appropriate
terminal on the components: + to + and – to –. If the
cables are reversed, the sound will be distorted and will
lack base.
Do not remove the front cover of supplied speaker.
It takes a few seconds (and may take longer) for the
transmitter and wireless speaker (left, right) to
communicate with each other.
When the main set is turned off, the transmitter is also
turned off automatically and the wireless speaker is in
standby mode (red LED indicator).
If the wireless speaker is turned off, the wireless speaker
will not function.
Front speaker
Subwoofer
Wireless Speaker
[Rear speaker (Left)]
(Left)
L
AUDIO
R
HDMI OUT
9