Sub PCB installation(optional)
Only for multi system
(Wried remote controller, central remote controller etc.)
1. Turn the power off and take off the front panel of the indoor unit.
2. Take off the Cover PCB.
3. Attach the Sub PCB to the right side of the Panel-frame.
Cover PCB
4. Find the PCB wire, and connect the wire to the Sub PCB as seen in the picture.
5. Connect the wire(remote controller, central remote controller etc) to the Sub
PCB.
Sub PCB
6. Assemble the Cover PCB and the front panel.
41
Maldive EUR_AQV09P@_IBIM_32436A_E.indd 41
2010-11-11 15:02:32