Sub Pcb Installation(Optional) - Samsung AQV K Series Manual

Sub PCB installation(optional)

Only for multi system
(Wried remote controller, central remote controller etc.)
1. Turn the power off and take off the front panel of the indoor unit.
2. Take off the Cover PCB.
Cover
PCB
3. Attach the Sub PCB to the right side of the Panel frame.
4. Find the PCB wire, and connect the wire to the Sub PCB as seen in the picture.
Sub PCB
5. Connect the wire(remote controller, central remote controller etc) to the Sub
PCB.
6. Reassemble the Cover PCB and the front panel.
• T he Sub PCB is attached to be controlled by the wired remote controller and central controller.
43
AQV09K&Y@@_Jungfrau_IBIM_E_32448A.indd 43 2011-3-19 15:46:12