Table of Contents
Advertisement
[Time downloading]
[Off]:
•
Sets the time manually from the
[Time setting] menu.
[On]:
•
Sets the time by downloading
from the signal system in the [Download
program] menu.
[Download program]
(Appears if you select [Clock setup] ≥ [Time
download] ≥ [On]). Selects the programme
where time downloading must be performed.
[Time offset]
(Appears if you select [Clock setup] ≥ [Time
download] ≥ [On]) Selects the correct time
zone which is downloaded from [Download
program].
[Buzzer volume]
Selects the volume of the clock buzzer.
How to set the TV alarm?
1
Selects [Hospitality] in the [Application]
menu.
2
Sets the time either from [Time setting] or
[Download program]. When set, the time
will be shown on the clock display.
3
ALARM ON on the Guest remote
Press
control to access the [Alarm] menu.
[Alarm time]:
•
[Alarm status]:
•
status.
[Alarm off]:
•
the alarm or [No] to keep the alarm
enabled.
Note
When
the alarm is enabled,
•
appears on the clock display.
ALARM OFF on the Guest
Press
•
remote control to cancel the alarm,
icon disappears from the clock display
simultaneously.
EN
32
Sets the alarm time.
Displays current alarm
Selects [Yes] to cancel
icon
Speaker settings
[TV speaker enable]
•
[Off]:
Disables the TV speaker. The
headphone volume functions normally.
[On]:
•
The TV speaker is enabled.
(Default setting).
[Independent main speaker mute]
This option only appears when you select [TV
speaker enable] ≥ [On].
•
[Off]:
Press ¬(MUTE) or"+/- on the
Guest remote control will affect both
the TV speaker and the headphone
volume (Default setting)
[On]:
•
Press ¬(MUTE) on the Guest
remote control will affect the TV
speaker volume only. The headphone
volume functions normally.
Note
If the TV speaker is muted independently,
•
+/- on the Guest remote control
press
"
will only affect the headphone volume.
[Default main speaker volume]
Only appears when you select [Independent main
speaker mute] ≥ [On]. Users can set the TV
speaker and headphone volume to a certain level
as the default setting. This option can avoid sudden
high-volume when TV speaker is turned on again
from independently mute.
Installation
[Blank channel]
The Blank channel function disables the display
of video on the TV, but does not affect the audio
output. This function can be used for audio
applications (example: music-only channels, and so
on) which do not necessarily require the display
of video.
1
Enters the [Blank channel], the list of all
channels appear.
2
Selects one or more channels and press OK
to mark.
3
The channels marked with [X] will not
display video on the TV.
Advertisement
Table of Contents
