1
Press MENU.
2
to select [Setup] >
Press
[Features] > [Sleep timer].
The bar appears..
»
3
Press
to set the sleep time.
»
The Sleep timer can be up to 180
minutes in steps of five minutes. If set
to zero minutes, the Sleep timer is
switched off..
4
Press OK to activate the Sleep timer.
»
The TV switches to standby after the
pre-defined period of time.
Alarm (On timer)
You can switch the TV to a specified channel
at a specified time, from standby or power-on
mode.
1
Press MENU.
2
to select [Setup] >
Press
[Features] > [On timer].
3
to enter the [On timer]
Press OK or
menu.
•
[Activate] Selects the frequency to
[Off] or [Once] or [Daily].
•
[Time] Sets the starting time to switch
on the TV automatically.
no.] Selects the channel.
•
[Programme
4
Press EXIT to exit.
Tip
•
[On timer] > [Activate] > [Off] to
Select
disable [On timer].
•
"How to set the TV alarm?"
Refer to page 32
for more details about TV alarm.
Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T
digital broadcasts. With digital broadcasts,
you have the additional option of selecting a
preferred subtitle language.
Enable subtitles on analogue TV
channels
1
Select an analogue TV channel.
2
Press TELETEXT.
3
Enter the three-digit page number of the
subtitle page with the Numeric buttons.
4
Press TELETEXT to switch off Teletext.
5
Press SUBTITLE.
[Subtitle mode] menu appears.
The
»
6
Select [On] to display subtitles always or
[On during mute] to display subtitles only
when audio is muted.
7
Press OK to enable subtitles.
Note
•
Repeat this procedure to enable subtitles on
each analogue channel.
Tip
•
Select
[Subtitle mode] > [Off] to disable
subtitles.
Enable subtitles on digital TV channels
1
When watching digital channels, press
SUBTITLE.
The
[Subtitle mode] menu appears.
»
2
Select [On] to display subtitles always or
[On during mute] to display subtitles only
when audio is muted.
3
Press OK to enable subtitles.
EN
15