Sony NEX-FS100U Operating Manual page 92

Troubleshooting (Continued)
The camcorder does not keep the setting changes.
• Some menu items return to the default setting when the power is turned off (p. 67).
• The [EXPANDED FOCUS] setting are not stored.
• You disconnected the power sources when the POWER switch was set to ON. Before
disconnecting the battery or the AC Adaptor/Charger, set the POWER switch to OFF and
make sure that the access lamp is turned off.
There is a time difference between the point when the START/STOP button is
pressed and the point that the recording movie is started or stopped actually.
• On your camcorder, there may be a slight time difference between the point where you press
the START/STOP button and the actual point that recording movie starts/stops. This is not a
malfunction.
The aspect ratio (16:9 (wide)/4:3) cannot be changed.
• The aspect ratio of high definition image quality (HD) movies is 16:9 (wide).
Automatic focus does not function.
• Set the FOCUS switch to AUTO to enable the automatic focus function (p. 29).
• Adjust the focus manually if the automatic focus does not work properly (p. 29).
• Use an E-mount lens (p. 18).
Menu items are grayed out or do not work.
• You cannot select grayed out display items in the current recording/playback situation.
• There are some functions you cannot activate simultaneously. The following list shows
examples of unworkable combinations of functions and menu items.
Cannot use
[ON/OFF] of [AE SHIFT] All of iris, gain, and shutter speed are set manually.
[ZEBRA], [PEAKING]
[ON/OFF] of [MARKER] [EXPANDED FOCUS] is set to [ON].
[TC PRESET]
[COLOR BAR]
92
Situation
[COLOR BAR] is set to [ON].
[TC MAKE] is set to [REGENERATE].
Movies are being recorded.
[EXPANDED FOCUS] is set to [ON].