Sony NEX-FS100U Operating Manual page 16

Step 3: Charging the battery pack (Continued)
After charging the battery
The charge lamp turns off (normal charge).
If you continue charging more 1 hour after
the charge lamp turns off, you can use the
battery a little longer (full charge).
Remove the battery pack from the AC
Adaptor/Charger when the charge is
completed.
To attach the battery pack
Press the battery pack against the back of
your camcorder and slide it right as shown
below.
z Tips
• You can check the remaining battery life with
the status check function (p. 55).
To remove the battery pack
Slide the POWER switch to OFF. Push the
BATT RELEASE (battery release) button
and slide the battery pack as shown below.
16
BATT RELEASE button
To store the battery pack
If the battery pack is not in use for a while,
run down the battery and store it. See page
106 for details on storage of the battery
pack.
Charging time
Approximate time (minute) required when
you charge a fully discharged battery pack.
Normal charge
Battery pack
time
NP-F770
NP-F970
b Notes
• The supplied battery pack is NP-F770.
• You cannot use the NP-F570 battery pack with
your camcorder.
On the battery pack
• Before changing the battery pack, slide the
POWER switch to OFF.
• The Battery Info (p. 55) will not be correctly
displayed under the following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out.
Fully charge
time
250 310
365 425