Table of Contents
Advertisement
USING EXTERNAL UNITS
Connecting external units
Before connecting external units, set this unit to the stand-by mode and turn off the power to the external
units.
Connecting to stereos or MD/CD players (equipment which can output analog signals)
The other MD/CD player
T o t h e o u t p u t /
headphone jack
To the analog
output jacks
LEFT
Commercially available RCA cord
Note:
When the audio output signal of an external unit is connected to this unit, oscillation may occur.
In such a case, disconnect either the input or output connection.
Headphones
Notes:
Before plugging in or unplugging the headphones, make sure the volume level is reduced.
Be sure your headphones have a 1/8" (3.5mm) diameter plug and are between 16 ohms and 50
ohms impedance. The recommended impedance is 32 ohms.
When headphones are connected, the speakers are disabled automatically.
Adjust the VOLUME control for the desired volume.
Commercially available cord
with 1/8" (3.5 mm) stereo
mini-plug and RCA plugs
RIGHT
RIGHT
RIGHT
34
LEFT
RIGHT
LEFT
LEFT
Red plug → To RIGHT
White plug → To LEFT
AUX
INPUT
LEVEL
RIGHT
LEFT
Advertisement
Table of Contents
