Sharp Aquos LC-26AF3X Operation Manual page 49

HOW TO SET THE FACTORY PRESETS
Turn off the TV by pressing POWER on the TV.
After waiting for about 1 minute, press and hold down RESET and press POWER on the TV to turn on the TV.
All setting items (except TV channel) return to the factory presetting.
NOTE
• Password will be cleared after running the factory presetting operation.
You can run the Auto Installation again by using the following steps.
1
Turn on the power of the TV.
2
Press MENU. (Make sure the menu screen displays.)
3
Press c/d to select "Setup".
4
Press a/b to select "Auto Installation", and then press ENTER.
5
Press c/d to select "Yes", and then press ENTER.
The Password is
NOTE
• As a precautionary measure, make a note of your password above, scissor it from this manual, and keep it in a familiar
place.
48
.