Attaching The Shoulder Strap - RCA CC616 User Manual

Recording

Attaching the Shoulder Strap

The camcorder's shoulder strap is designed to let you carry the camcorder from your
shoulder and – when you are ready to shoot – bring the camcorder to shooting position
in one quick movement.
To Attach the Shoulder Strap
1. If the strap keeper is
over a double section
of the strap, slide the
strap keeper off the
end of the strap.
Replace the keeper
on the strap between
the buckle and the
end of the strap as
shown.
2. Loop the end of the strap over the top
of the shoulder strap attachment ring.
Keeper
Buckle
Attachment
Rings
3. Thread the end of the strap back
through the keeper and buckle. Make
sure the strap is not twisted.
56
4. Attach the other end of the strap to the
other shoulder strap attachment ring.
Keeper
5. Adjust the shoulder strap to the desired
length.
6. Slide both keepers up snugly against
the shoulder strap attachment rings to
prevent the strap from slipping.
Cautions: When carrying the
camcorder with the shoulder strap,
you may find it convenient to rotate
the viewfinder down and slide it to
the front. This helps prevent
possible damage to the viewfinder
from bumping against your body as
you move.
Make sure the shoulder strap is
firmly attached before using it to
carry the camcorder.