Edit Insert (Remote Only) - RCA CC616 User Manual

Recording

Edit Insert (Remote Only)

Edit insert lets you record new video in place of previously recorded video without
replacing the audio.
COUNTER R/M Button
POWER Switch in VCR
To Edit Insert
1. Place the tape with safety tab intact
into the camcorder.
2. Place POWER switch in VCR.
3. Locate the place you want the edit
insert to stop and press PLAY/PAUSE
(PAUSE on remote).
4. Press COUNTER R/M for more than
two seconds on the camcorder to set
the time counter back to 0:00:00.
5. Press COUNTER R/M again for less
than one second to turn on memory
stop (M).
6. Press REW, locate the place you want
edit insert to begin, and press
PLAY/PAUSE (PAUSE on remote)
exactly at the beginning of the scene.
7. Press INSERT and PAUSE on the
remote together to place the
camcorder in edit insert standby.
PLAY/PAUSE
REW
Button
START/STOP
ZOOM
PLAY
TIME LAPSE
PLAY
Button
STOP
REW
REW
Button
INSERT
INSERT
Button
and appear in the viewfinder.
Display in Viewfinder
Note: To dub new audio at the same time,
press A.DUB and PAUSE together. Press
INSERT and PAUSE together to return to
the edit-insert mode.
8. Press START/STOP on remote (thumb
trigger on camcorder) to start edit
insert. appears in the viewfinder.
New video is recorded over the
previous video. When the counter
reading of M 0:00:00 is reached, edit
insert stops and the camcorder enters
playback.
Note: The camcorder may stop slightly
before or after the edit out point and there
may be slight distortion at this point.
SELF
INT.
TIME
REC
TIME
ANIM.
PAUSE
PAUSE
Button
FF
A.DUB
53