Pioneer PDP-S53-LR Operating Instructions Manual page 3

Checking materials included in
package
7 Speaker units (×2)
Left speaker
7 Cushions (×2)
7 Cord clampers (×2)
7 Operating instructions [This document] (×1)
Notes on Installation Work:
This product is marketed assuming that it is installed by
qualified personnel with enough skill and competence.
Always have an installation specialist or your dealer
install and set up the product.
PIONEER cannot assume liabilities for damage caused
by mistake in installation or mounting, misuse,
modification or a natural disaster.
Right speaker
7 Speaker cords (×2)
7 Screws [M8] (×4)
Mounting speakers to a Plasma
Display
Note:
The speakers are divided into a right (R) and left (L) speaker.
When attaching the speakers, be sure to check to labels (R/L)
located on the rear of the speakers.
1 Remove the seals from the cushions and then
attach the cushions to the sides of the speakers
in the locations indicated in the diagram below.
2 Screw the M8 screws loosely into the screw
holes located at the top of the Plasma Display
(2 locations).
Screws (M8)
English
Cushions
3