Interrupting Job In Progress: Interrupt Mode - Oce CS665 Pro User Manual

Advanced information
13.3

Interrupting job in progress: Interrupt mode

Use the Interrupt mode to interrupt copying in progress to perform a simple job. Pressing [Interrupt] on the
control panel stops the machine operation temporarily at the timing available for interrupt copying. When
interrupt copying is completed, the settings for the previous job restore automatically and the Copy Screen
displays.
0 The Interrupt mode cannot be selected with the following copier conditions:
Machine is not operating printing or scanning job.
Program Overlay is in use.
The Call for Service message displays or a paper misfeed occurs.
Already using Interrupt mode.
0 Reserve job cannot be operated in Interrupt mode.
0 Auto Low Power or Auto Shut-off will not function during Interrupt mode.
1
Press [Interrupt] on the control panel.
The [Interrupt] LED starts flashing, then keeps lighted when
machine is ready for Interrupt mode.
The Copy Screen for interrupt copying will be displayed.
2
Set copy conditions, as desired.
– All copy conditions except Reserve mode can be specified.
3
Position the original, then press [Start] to start the interrupt copying.
4
When interrupt copying is completed, press [Interrupt] again.
The [Interrupt] LED turns out and the settings of the previous job will be restored.
5
Press [Start] to resume copying.
CS665 Pro
13
13-7