Setup; Setting The Switches - JVC TK-C2201U Instructions Manual

Setting the Switches

Before mounting the camera, set the function setting switches on the camera.
To set the switches, use a fine-tipped screwdriver.
Function selection
switches
.
1 [D/N AUTO/OFF] Easy Day & Night Switch
Set this to "AUTO" when shooting a subject with continually changing brightness
(day/night). The image switches to color when the subject is bright, and black and
white when it is dark. The image is set to color at all times when "OFF" is selected.
(Default setting: AUTO)
2 [BLC OFF/ON] Backlight Compensation Selector Switch
Set this to "ON" when shooting in backlight. The subject becomes easier to see as
brightness is adjusted according to the photometry area set in [BLC AREA] of the
menu.
(Default setting: OFF)
Memo Refer to [BLC AREA] in the "MENU SETTING" (separate).
3 [MONITOR TYPE LCD/CRT] Monitor Type Selector Switch
Set this to "LCD" or "CRT" according to the monitor in use.
(Default setting: LCD)
Memo Refer to [LCD TYPE] in the "MENU SETTING" (separate).
DIP SW
1 OFF
D/N AUTO
2 ON
BLC OFF
LCD 3 CRT
MONITOR
TYPE
4
NOT USED
SEE INSTRUCTION
MANUAL
DIP Switch Settings Chart

Setup

9