Table of Contents
Advertisement
Trouble
White balance setting
cannot be activated.
The continuous
shooting speed is slow.
Playback cannot be
performed.
The same image is
displayed for a long
time during video
playback, or motion is
choppy.
The black & white fader
does not work.
There is a noise during
playback.
During video playback,
F
the
indicator fl ashes.
Files cannot be deleted.
The data process is too
slow after the power
is switched on or the
mode is changed.
The microSD card
cannot be removed
from the camera.
The [CREATE DVD]
screen is displayed in
the LCD monitor, and
no other operations
can be performed.
The touch sensor or
sensor button does not
function.
•
Do not select the sepia (SEPIA) or monotone
(MONOTONE) mode before setting white balance.
•
The continuous shooting speed will drop after repeated
continuous shots, depending on the recording media, or
under certain recording conditions.
•
Select the recording medium properly.
•
To watch images on a TV, set the TV's input mode or
channel that is appropriate for video playback.
•
Replace the microSD card. (When the surface of the card
is damaged, diffi culty in reading the data occurs.)
•
Perform clean up or format the microSD card.
•
Do not select the sepia (SEPIA) or monotone
(MONOTONE) mode before setting white balance.
•
The driving sound (hum) of the hard disk may have been
recorded if the camera was moved suddenly during
recording. Do not move or shake the camera suddenly
during recording.
•
The temperature of the camera is increasing. If the
camera continues to heat up, playback may be stopped
to protect the recording medium. In this case, turn off the
power, and then wait until the camera cools down.
•
Remove protection from the fi les and delete them.
•
There is a large number of still images (approx. 1,000 or
more) stored in the recording medium. Copy the stored
fi les to other devices, and delete them from the recording
medium.
•
Push the microSD card in a few more times.
•
Another operation is being attempted while a DVD burner
that is turned on is connected. Turn off the camera
connected to the DVD burner, or disconnect the USB
cable.
•
Touch the sensors with your fi nger. The sensors do not
function if you touch them with your fi nger nail or with
gloves on.
Action
26
–
64
31
66
30
–
–
33
32
19
–
6
69
Advertisement
Table of Contents
