JVC GZ-MG467 Manual Book page 26

Hard disk camcorder
Hide thumbs Also See for GZ-MG467:
Table of Contents

Advertisement

Manual Recording
Menus
WB
Adjusts the white balance
to achieve the optimum
colors for the amount of
light in your surroundings
during recording.
SHUTTER SPEED
A fast shutter speed can
freeze the motion of a
fast-moving subject, and
a slow shutter speed can
blur the subject to give the
impression of motion.
PHOTOMETRY AREA
Enables you to adjust the
brightness in the desired
spot when backlight
compensation does not
work well.
EFFECT
Enables you to record
videos or still images with
special effects.
TELE MACRO
Enables you to shoot
a subject as large as
possible at a distance of
approx. 40 cm (1.32 ft)*
50 cm (1.64 ft)*
1
*
GZ-MG467
2
*
GZ-MG360/335/330
26
@
[AUTO] : White balance is adjusted automatically.
B
MWB : Adjusts the white balance manually depending on the
light source.
1) Hold a sheet of plain white paper in front
of the subject so that the white paper fi lls
the screen.
2) Keep touching the OK button until the
B
blinking.
D
FINE : When shooting outdoors on a sunny day.
E
CLOUD : When shooting outdoors on a cloudy day.
F
HALOGEN : When a video light or similar type of lighting is
used.
[AUTO] : The shutter speed is adjusted automatically.
1/2 to 1/4000 (For
1/2 to 1/500 (For
shutter speed.
NOTE
It is recommended to use the tripod (
with a slow shutter speed.
6
[WHOLE SCREEN] : Brightness is adjusted automatically for
whole screen.
7
SPOT : Brightness for the specifi ed spot is adjusted
automatically. Furthermore, brightness in the specifi ed spot
can be locked by selecting [LOCK]. The
L
To cancel spot exposure control
Select [WHOLE SCREEN] again so that the
disappears.
[OFF] : No effect is used.
1
J
SEPIA : The image has a brownish tint like old photos.
K
MONOTONE : The image becomes black and white like old
movies.
L
CLASSIC FILM* : This effect skips frames to give images of an
old movie atmosphere.
M
STROBE* : The image looks like a series of consecutive
snapshots.
* Not available in
1
[OFF] : Disables the function.
t
1
or
ON : Activates the function.
2
.
(Continued)
Settings: [ ] = Factory-preset
indicator starts blinking then stops
!
mode)/
#
mode) : The smaller the value, the faster the
#
mode.
pg. 18) when recording
C
indicator appears.
C
indicator

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gz-mg360Gz-mg335Gz-mg330

Table of Contents