Hitachi DZ-HS403 Instruction Manual page 50

●Interpreting symbols on LCD screen when recording with the screen
facing the same direction as the lens
Screen
display
symbol
• Status in which recording is not possible on HDD.
• An attempt to record a photo on HDD was made.
• An attempt to record a still is being made with a DVD-RAM/DVD-RW/DVD-R/+RW
N
used.
• An unusable disc is loaded.
• An attempt to record movie on a card was made.
R
• An unusable card is loaded.
• HDD/disc is write-protected.
X
• A locked card is loaded.
• During recording (lights in red).
k
• The remaining capacity on HDD/disc is approaching the limit 0 (blinks in red).
• During recording pause (lights in green).
• During focus lock (lights in purple).
l
• The remaining capacity on HDD/disc/card is approaching the limit 0 (blinks in red).
• There is no remaining capacity on HDD/disc/card (blinks in green).
• An attempt to record a copy-guarded image is being made (blinks in green).
:
Note
• If the LCD screen is set facing the same direction as the lens, the LCD screen will display a mirror image (left and
right reversed).
• If the LCD screen is set facing the same direction as the lens, you can also view subject image in the viewfinder.
• Although you can switch to the manual focus, exposure and on-screen display modes even during recording with
LCD screen facing the same direction as lens, they will not appear on the screen.
• When the LCD monitor is opened and turned 180º with the Program AE set to Low Light, the monitor screen will
light white (see page 61).
50
Description