Changing Display Language (Language); Setting Date And Time - Hitachi DZ-HS403 Instruction Manual

Changing Display Language (Language)

You can change the language used to display the menu and information.
The following shows that 日本語(Japanese) is changed to English.
1
Press the MENU button, then select "初期設
定" using f/e/ d/c/A.
Then select "言語切替" (Language).
2
Press A or c button
with the screen shown
on the right displayed:
The "Language" screen
will appear.

Setting Date and Time

Set the current date and time so that the date and time you make a recording can be recorded correctly.
The following procedure can also be used to correct the date and time you have already set.
1
Press the MENU button, use the f/e/
d/c buttons to choose "Date Set" on the
"Date Setup" menu screen.
2
Press the c button.
The figure for the
month will be selected.
[The digit that is
highlighted first depends on the date display
format (set up in Date Mode): The digit on the
left end of the date display will be first
highlighted.]
:
Note
After setting the figure for the month, press the c
button to select the digit to be set. If you press the
A button after selecting the figure for the month,
the screen for verifying the set date will appear
instead of screen for setting day, year or time.
1<>2/3
HDD HDD
1<>2/3
HDD HDD
Da t e Se t u p
Da t e Se t 1 / 1 / 2 0 0 7
1 2 : 0 0AM
Da t e Mode
ENTER RETURN
3
Choose "English", and
then press A button.
The display will change
to English.
:
Note
The language setting will be stored in memory even
when the DVD video camera/recorder is turned off.
Use f / e / d / c buttons
to select, and then press A to
designate.
3
Press the d or c
button to select the digit
you want to set in
sequence.
Press the f or e button to select the
number for current date/time, and then
repeat step 3 to set the current date and time.
:
Note
To stop date/time setting midway, press the C
button.
Da t e Se t u p
Da t e Se t 1 2 / 1 / 2 0 0 7
Da t e Mode 8 : 00AM
ENTER RETURN
35