Table of Contents
Advertisement
4
After setting the current
date and time, press the
A button.
The screen for verifying
the set date will appear.
CHANGING DISPLAY FORMAT OF DATE AND TIME
You can select one of three date display formats: month/day/year, day/month/year or year/
month/day. Choose "Date Mode" on the "Date Setup" menu screen in procedure 1, and then set to
the desired date display mode.
:
Note
This DVD video camera/recorder incorporates a rechargeable battery to store the date and time in memory. If this
built-in battery is exhausted, the date and time will be reset. To prevent this, every 6 months, connect the AC
adapter/charger to DVD video camera/recorder and connect them to AC outlet, or attach a charged battery to the
DVD video camera/recorder, and leave it for at least 24 hours with the DVD video camera/recorder turned off: The
built-in battery will recharge.
Initial Settings
Press the MENU button, and then use f/e/d/c/A buttons to display the "Initial Setup"
menu screen. See page 51 for detailed operation procedure. Press the MENU button again to exit
setting.
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
Select "On" or "Off", and
then press the A button.
On: Beep will be heard
when the power
switch is changed
over, the REC button is pressed when
HDD/disc is used, the SLEEP/RESTART or
EJECT button is pressed, etc.
Off: No beep is heard.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
Select "On" or "Off", and
then press the A button.
On: To engage power
save. If the DVD
video camera/
recorder is left in the recording pause status
without being operated for 5 minutes, it
will automatically turn off to prevent the
battery from discharging needlessly.
Off: To cancel power save.
36
Da t e Se t
1 2 / 1 / 2 0 0 7 8 : 0 0AM
Da t e s e t u p?
YES
NO
ENTER
1<>2/3
HDD
HDD
I n i t i a l S e t u p
On
Be e p
P o w e r S a v e
O f f
R e c o r d L E D
L a n g u a g e
Demo Mode
Re s e t
ENTER
RETURN
I n i t i a l S e t u p
Be e p
On
P o w e r S a v e
O f f
R e c o r d L E D
L a n g u a g e
Demo Mode
Re s e t
ENTER
RETURN
5
If the displayed date and time are correct,
press the d button to choose "YES", and
then press the A button.
The date and time will be set, and the DVD
video camera/recorder will enter the
recording pause status.
Choosing "NO" will restore the menu screen.
:
Note
The "Beep" setting will be stored in memory even when
the DVD video camera/recorder is turned off.
:
Note
• To turn the DVD video camera/recorder on again from
automatic off activated by the power save function,
set the power switch to "OFF", and then set it to
"HDD", "DVD" or "SD".
• The Power Save setting will not appear in the on-
screen information display.
• If the sleep/restart standby status continues for 30
minutes, the DVD video camera/recorder will
automatically turn off regardless of the Power Save
setting.
Advertisement
Table of Contents
