Fujitsu MHW2160BH Product Manual page 150

Interface
Code
0000h Command complete without error.
0001h Invalid Function Code.
0002h Input LBA out of range.
0003h Request sector count over flow.
0004h Invalid Function Code in Error Recovery Control command.
0005h Invalid Selection Code in Error Recovery Control command.
0006h Host read command timer is less than minimum value.
0007h Host write command timer is less than minimum value.
Background SCT command was aborted because of an interrupting
0008h
host command.
Background SCT command was terminated because of
0009h
unrecoverable error.
000Ah Invalid function code in LONG SECTOR ACCESS command.
SCT data transfer command was issued without first issuing an SCT
000Bh
command.
000Ch Invalid function code in Feature Control command.
000Dh Invalid Feature Code in Feature Control command.
000Eh Invalid New State in Feature Control command.
000Fh Invalid Option Flag in Feature Control command.
0010h Invalid Action Code.
0011h Invalid Table ID.
0012h Command was aborted due to drive security being locked.
0013h Invalid revision code.
Foreground SCT operation was terminated because of
0014h
unrecoverable error.
0015h
to Reserved
BFFFh
C000h
to Vender specific.
FFFEh
5-76
Table 5.26 SCT STATUS code
Definition
C141-E245