Fujitsu MAU3147RC Product/Maintenance Manual page 48

Installation Requirements
(5) Service clearance area
The service clearance area, or the sides which must allow access to the HDD for installation or
maintenance, is shown in Figure 4.6.
[Surface Y]
• Interface connection
(6) External magnetic field
The drive should not be installed near the ferromagnetic body like a speaker to avoid the influence of
the external magnetic field.
(7) Leak magnetic flux
The HDD uses a high performance magnet to achieve a high speed seek. Therefore, a leak magnetic
flux at surface of the HDD is large. Mount the HDD so that the leak magnetic flux does not affect to
near equipment.
4-6
[Surface Z]
• Holes for mounting screw
Figure 4.6 Service clearance area
[Surface X]
• Holes for mounting screw
(Both side)
C141-E222