Table of Contents
Advertisement
ASSEMBLY
Continued
6
Always have burner shield and screen in place before operating
heater. This prevents excessive temperatures on heater surfaces.
Failure to position the parts in accordance with these diagrams or
failure to use only parts specifically approved with this heater may
result in property damage or personal injury.
Front Panel
Screen
Truss-
Head
Screw
Nut
Brass
Front
Trim
Attaching Brass Front Trim to Front Panel
1. Locate brass front trim in brass trim package.
2. Slide the head of two truss-head screws from hardware packet into each end of
brass front trim (see Figure 5).
3. Line up screws with holes in front panel (see Figure 4). Insert screws in holes.
Attach nuts from inside of front panel. Tighten with wrench.
Brass Front
Trim
Truss-Head Screw
Figure 5 - Attaching Brass Front Trim to Front Panel
WARNING
WARNING ICON
G 001
Log
Screw
Screw
Figure 4 - Assembling Heater
Front Panel
Heater Cabinet
Deflector
Log
Retaining
Brackets
Burner Shield
Nut
101934
Advertisement
Table of Contents
