•
ME FW Error Code
•
ME NM FW Status Value
•
BIOS Booting Mode
•
Cores Disabled
•
ME FW SKU Information
•
End-of-POST Status
Super IO Configuration
Super IO Chip NCT6776D
Serial Port 1 Configuration/Serial Port 2 Configuration
Serial Port 1/ Serial Port 2
Select Enabled to enable the onboard serial port specified by the user.
The options are Enabled and Disabled.
Change Settings
This option specifies the base I/O port address and the Interrupt Request
address of Serial Port 1 and 2. Select Auto to let the BIOS automatically
assign the base I/O and IRQ address.
The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h;
IRQ=3, 4, 5, 6, 7, 9, 10, 11), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11),
(IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11), and (IO=2E8h; IRQ=3, 4, 5, 6,
7, 9, 10, 11).
The options for Serial Port 2 are Auto, (IO=2F8h; IRQ=3), (IO=3F8h;
IRQ=3, 4, 5, 6, 7, 9, 10, 11), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11),
(IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11), and (IO=2E8h; IRQ=3, 4, 5, 6,
7, 9, 10, 11).
Serial Port Console Redirection
Console Redirection (COM1, COM2, SOL)
Use this feature to enable console redirection for COM1, COM2 and SOL ports.
The options are Enabled and Disabled. The default for both COM ports is Disabled.
The default for SOL is Enabled.
4-19
Chapter 4: AMI BIOS