Supermicro X10SLM+-F User Manual page 80

X10SLM+/X10SLL+ Motherboard Series User's Manual
C6 Latency (Available when "CPU C-States" is set to Enabled)
Select Short to set a short delay time(period) during which the BIOS reports
CPU C6 State (ACPI C3) to the operating system. Select Long to set a long
delay time(period) during which the BIOS reports CPU C6 State (ACPI C3)
to the operating system. The options are Short and Long.
CPU C7 Report (Available when "CPU C-States" is set to Enabled
Select Enabled to allow the BIOS to report the CPU C7 State (ACPI C3) to the
operating system. CPU C7 State is a processor-specific low C-State. The options
are Enabled and Disabled.
C7 Latency (Available when "CPU C-States" is set to Enabled)
Select Short to set a short delay time(period) during which the BIOS reports
CPU C7 State (ACPI C3) to the operating system. Select Long to set a long
delay time(period) during which the BIOS reports CPU C7 State (ACPI C3)
to the operating system. The options are Short and Long.
C1 State Auto Demotion
When this item is enabled, the CPU will conditionally demote C3, C6 or C7 requests to C1
based on un-cored auto-demote information. The options are Disabled and Enabled.
C3 State Auto Demotion
When this item is enabled, the CPU will conditionally demote C6 or C7 requests to C3 based
on un-cored auto-demote information. The options are Disabled and Enabled.
C-State Pre-Wake
Select Enabled to support C State Pre-Wake State features. The options are En-
abled and Disabled
Package C-State limit
Select Auto for the AMI BIOS to automatically set the limit on the C-State package
register. The options are C0, C1, C6, C7 and Auto.
LakeTiny Feature
Select Enabled for LakeTing feature support. The options are Disabled and En-
abled.
ACPI T State
Select Enabled for ACPI T state (processor throttling) feature support. The options
are Disabled and Enabled.
4-10