Table of Contents
Advertisement
X10SLM+/X10SLL+ Motherboard Series User's Manual
BIOS
Power Configuration
PC Health Monitoring
USB Devices
X10SLM+ Series
Four (4) USB 3.0 ports: Two (2) USB ports on the rear
I/O back panel, One (1) internal header and one (1) Type
A port.
Six (6) USB 2.0 ports: Two (2) USB ports on the rear I/O
panel, and 4 ports on Two (2) internal headers.
X10SLL+ Series
Two (2) USB 3.0 ports: One (1) internal header and one
(1) Type A port.
Six (6) USB 2.0 ports: Four (4) USB ports on the rear I/O
back panel, and 2 ports on one (1) internal header.
Serial (COM) Ports
One (1) front accessible serial port header (COM2), and
one (1) serial port on the I/O back panel.
Super I/O
Nuvoton NCT6776
64 Mb AMI BIOS
SPI Flash BIOS
®
Plug and Play (PnP), DMI 2.3, ACPI 1.0, USB Keyboard
and SMBIOS 2.3
ACPI/ACPM Power Management
Main Switch Override Mechanism
Keyboard Wake-up from Soft-Off
Internal/External Modem Ring-On
Power-on mode for AC power recovery
CPU Monitoring
Onboard voltage monitors for CPU core, +3.3V, +5V,+/-
12V, +3.3V Stdby, +5V Stdby, VBAT, Memory, Chipset
CPU 3-phase switching voltage regulator
CPU/System overheat LED and control
CPU Thermal Trip support
Thermal Monitor 2 (TM2) support
Fan Control
Fan status monitoring for speed and on/off control,
Five (5) 4-pin fan headers
Low noise fan speed control
1-8
Advertisement
Table of Contents
